Features:
Replacement Parts
Specifications:
Compatible Models:EPSON Stylus Pro 7710 9710 7700 9700
Reset the Maintenance Tank Chip only (DO NOT USE FOR CARTRIDGE CHIP)
Reset Procedure:
Line up the contacts to match so you see the red LED is on. Hold the resetter in contact with the Maintenance Tank Chip until the red LED turns green.
1.Align the chip to the correct notch on the reset unit so that the chip contacts and the pins on the resetter meet.
2.Keep the two units in firm contact. If the red light is blanking, it shows the two units contact well.
3.If the red light turns to green, it shows the reset operation is successful.
4.Maintenance Tank Chip is now ready for use again.
If the red LED does not turn green, retry this reset. If the LED stay red, the Maintenance Tank Chip is corrupted or damaged.
TROUBLESHOOTING:
1.After the red LED flash, it stays on and does not turn green
a). The pins on the resetter are not in good contact with the chip on the maintenance tank. The contact may be dirty or oily.
b). If the Maintenance Tank is not an original Epson brand ink cartridge, the chip may be not compatible with the resetter.
What in the box:
1*Replacement Maintenance Tank Chip Resetter





Reviews
There are no reviews yet.