I. Overview
JT100 series 125KHZ non-contact radio frequency ID card receiver suitable for parking management systems, access control, anti-theft and other long-range radio frequency identification applications.
2 Features
The built-in receiver antenna operating frequency of 125 KHZ.
To boot automatically tuning function
Fully supports uem4100 compatible format ID card (64bits, Manchester encoding)
Effective distance up to 100cm-120cm
Within the effective distance data reception time of less than 100ms
About the single DC power supply, operating current of approximately 100mA
WG26/34/RS232/RS485 standard format data output
Built-in buzzer
Third interface description
Leads No.
Wire color
Wiegand 26bits Interface Description
1 red power supply (Vcc): +12 V to +15 V?
2 black ground (GND)
3 green data R +
R-4 white data
Features Parameters
Electrical, mechanical characteristics (non TA = 25 °, Vcc = 5V)
Project Minimum Typical Maximum Units
Power, Vcc 10 12 15 V
Operating current, Ic 100 150 mA
Operating frequency, FRES 125 Khz
Decoding time, TDEC 60 100 ms
Operating temperature, TOPR 0 ~ 70 ° C
Storage Temperature, TSTR -55 ~ +125 ° C
Size, LXWXH 24X24X3.5 cm
V. instructions
The JT100 long drive reader power after the buzzer often Ming number of sound, the system enters the self-test and auto-tuning process, buzzer sounding loudly when optimal system performance, system self-tuning is completed and enter the normal operating mode is to ensure that the system can work properly. reader ID card is still in RF induction district reader will not re-read the card number to open four holes for installation by JT100 series of long-range reader.





Reviews
There are no reviews yet.