Barcode printer parts supplier · Guangzhou, China Worldwide shipping · Reply within 24h

Replacement Chip Resetter For Epson 4880 7600 7880 9600 9880 10600

$9.80

Replacement Chip Resetter For Epson 4880 7600 7880 9600 9880 10600

Availability: 200 in stock

SKU: EPSONLQ13022323 Category:

Features:
Replacement Parts

  

Specifications:
Compatible Models:Epson 4880 7600 7880 9600 9880 10600

Will reset the cartridge’s chip or the ink waste (Maintenance) tank
The price of the original EPSON ink cartridge is expensive, how to decrease and save the cost of printing is our concern. The ink level of EPSON intelligent cartridge is recorded in the chip IC, which accurately records and controls the ink level. It cannot be reused even though the empty ink cartridge is refilled, and it results in high expense.

Reset Procedure:
Line up the contacts to match so you see the red LED is on. Hold the resetter in contact with the chip until the red LED turns green.
1.Align the chip to the correct notch on the reset unit so that the chip contacts and the pins on the resetter meet.
2.Keep the two units in firm contact. If the red light is blanking, it shows the two units contact well.
3.If the red light turns to green, it shows the reset operation is successful.
4.Cartridge is now ready for refilling with ink.
If the red LED does not turn green, retry this reset. If the LED stay red, the cartridge chip is corrupted or damaged.

TROUBLESHOOTING:
1.After the red LED flash, it stays on and does not turn green
a). The pins on the resetter are not in good contact with the chip on the cartridge or maintenance tank. The contact may be dirty or oily.
b). If the ink cartridge is not an original Epson brand ink cartridge, the chip may be not compatible with the resetter.
c). If the ink cartridge is an original Epson brand ink cartridge, the chip may be burned out or Epson may have changed the chip design. But it still can work with this kind of ink cartridge to fulfill the level, only the green light won’t shine, the red LED does.

2.The printing quality is not good.
a). The quality of the ink you are using may be inferior. We recommend using inks that are specifically matched to Epson’s original colors and other characteristics. (Especially if you are printing digital photographs.)
b). Air bubbles entrapped in ink. To avoid this, inject the ink VERY slowly. Also, allow the cartridge to rest for 24 hours with the ink exit nozzles facing down before using.

 

  

What in the box:
1*Replacement Chip Resetter

Weight 100 g

Reviews

There are no reviews yet.

Be the first to review “Replacement Chip Resetter For Epson 4880 7600 7880 9600 9880 10600”

Your email address will not be published. Required fields are marked *

Shopping Cart
Scroll to Top